Produktai skirti aramex intl (19)

Osmocem SCK Fiber-reinforced monocomponent cement mortar, based on hydraulic binders, superprogoline fillers, selected fine aggregates and crystallizing reagent agents, which favor the penetration of the compound into the support. Ideal for low-thickness protective coatings (4 to 10 mm), with high counterweight adhesion. The specific formulation makes this product ideal for coatings in aggressive environments in contact with chlorides and sulphates (sewage systems). Packaging: 25 kg bag UM: €/kg

Spezifikation finden Sie auf unserer Website. Bei Anfragen und Rückfragen senden Sie uns gerne eine Nachricht.

Componente fondamentale dei tessuti connettivi. È il costituente liquido sinoviale, presente all'interno delle articolazioni, protegge le cartilagini dall'usura e dai carichi eccessivi ne fornisce la nutrizione, accelerando i processi riparativi e fornendo un ottimo livello di idratazione, turgore, viscosità e plasticità. Mantiene la forma e il tono dei tessuti – Filtra agenti infettanti o altre sostanze dannose per i tessuti. L'invecchiamento dell'articolazione porta ad una diminuzione del liquido sinoviale e ad una diminuzione della produzione di acido ialuronico con a conseguente aumento degli attriti tra le superfici articolari ed insorgenza di disturbi come, ad esempio, l’artrosi e l’artrite. Per questo motivo l'assunzione di L'acido ialuronico è particolarmente efficace nel trattamento e nella prevenzione dell'artrosi e fenomeni articolari traumatici di media e lieve entità. Confezione:30 compresse

Maxant® PWR is a silicone antifoam emulsion which offers excellent knockdown and durability. It is highly effective even at low level of usage. Maxant® PWR is stable in high acidic and alkaline formulations. It can be used in clear products. Recommended usage level for Maxant® PWR is 0,01- 0,5 %. A very good conditioning agent especially when formulated into; Clear liquid laundry detergent Liquid dishwashing detergent Glass cleaners Fabric softeners General purpose cleaners Permanent foam cut off Rapid foam knock-down Foam inhibition in extreme temperatures (up to 95 °C) Long term foam inhibition Compatibility with wetting agents Ease in forming dispersions in all foaming systems Ease in forming dispersions in hard Long durability in acidic and alkaline conditions Can be used in clear formulations Appearance:White viscous liquid Viscosity at 25°C:3000 - 7500 cP pH at 25°C:6,00 – 7,50 Ionic Character:Non-ionic

PROTEX is an excellent quality emulsion paint for interior and exterior use, with great hiding power and exist the 10 basic colour. It’s suitable for the colour mix of plastic and acrylic paints. It’s suitable for plaster, concrete, bricks and wood. It has great working and levelling properties, strong adhension and quick drying. It gives a beautiful mat finish. Information: Emulsion paint based on P.V.A-VEOVA copolymer. Applycating with brush, roller or airless and thinning with 5-10% clean water. The spreading rates are 9-12m²/Lt. on previously prepared surfaces. It drying normally on touch after 1-2 hours and recoatable after 3 hours. Times make different under cold or dump conditions PACKAGE:0,17 LT, 0,375 LT, 0,75 LT, 10 LT, 3 LT COLOR:Black, Blue

Miglioratore per fermalievitazione, adatto a paste lievitate, pani prelievitati o precotti destinati alla surgelazione. Formato:10 kg Dosaggio:1%

Algicide toitures, façades, terrasses Élimine radicalement les algues, lichens et tous les dépôts verts sur toitures (tuiles, ardoises), murs (briques, béton, pierres, bois traités), sols, carrelages, bassins, fontaines, clôtures, coques de bateaux, stores traités, matériaux composites… Redonne leur aspect initial aux matériaux traités. Ses agents détruisent les dépôts traités et favorisent leur décollement du support jusque dans les moindres interstices. Évite la réapparition des dépôts verts. Ne laisse ni trace ni pellicule sur les matériaux et n’en change ni l’aspect ni la couleur. Sans produit chloré, ininflammable. Réf:AM402 Conditionnement:Bidon de 5L – Carton de 2 Ex:ANTIALGUES TT

Milling machines

Protech Fix AC-Therm Water-based anti-condensing wall covering, with excellent fixing and anchoring properties, with good coverage based on high penetration acrylic resins, 3M Glass Bubble, pigments, fillers and covering fillers. Suitable as an anti-condensation fixative primer, prior to painting or coating the plaster with anti-condensation paints or plasters (-THERM). Ideal for interventions on walls with mucilage deposits, bacterial phenomena and moulds. Due to its low thermal conductivity, it is particularly suitable for solving mould problems. It can be applied on any plaster (rustic, civil, plaster, dry mortar, plasterboard, concrete, prefabricated, exposed concrete, etc.). Made with special resins and additives it reduces the absorption of the support while allowing the necessary transpiration, uniforms the absorption making the application of the finishing coats easier. It always works in depth, which is why it is the ideal preparation for applying water-based paints or coatings. Adhesion is excellent even on particularly difficult surfaces, thanks to the use of special resins and the presence in the formulation of an adhesion promoter interacting between the support and the product. Preliminary treatment of any surface (civil, plaster, rustic, dry mortars, plasterboard, concrete, prefabricated, exposed concrete etc.) designed to isolate the support surfaces and standardise the absorptions of the subsequent anti-condensate treatments (painting and protective coatings). Packaging: 14-liter bucket UM: €/l

Repar Tix HG SB Thixotropic, structural, fibre reinforced cement mortar, with compensated shrinkage, with high intrinsic water tightness, and extraordinary physical and mechanical characteristics: adhesion, compression resistance, flexural strength, abrasion resistance, etc. Perfect for remediation of structural works and articles in degraded concrete and very high-performance coatings. Repar Tix HG SB, in addition to normal manual application techniques, it is a structural mortar specially formulated for applications with pumping/spray machines (wet spritz-beton technique). Particularly optimized parameters are: rheology, thixotropy and workability of the product, which allow spraying operations with reduced wear of the mechanical parts and little waste on the ground. Rheoplastic, thixotropic, structural, composite cement mortar, based on special cements and selected siliceous aggregates, reinforced with a balanced mixture of READYMESH polypropylene fibres and calcium metasilicate microfibres, added with specific agents and a high content of silica fume. After hardening, it provides very high performance in terms of intrinsic water tightness, resistance to washing and hydrolysing, mechanical strength, abrasion and cavitation, anti-carbonation, chemical-physical stability, resistance to harsh atmospheric agents and to leaching water. It has three-dimensional fibre-reinforcement, provides high hold; it is dimensionally stable (compensated shrinkage). The product can be supplied in mono-component or two-component version. The product, in the monocomponent version, is mixed with water (approx. 16% of the weight of the bag). In the two-component version, the product is mixed by adding the 4.5 kg of component B. The two-component version increases adhesion to the support and reduces free shrinkage to air, especially in the initial hardening phases and in particularly hot climates, without modifying the physical-mechanical characteristics of the end product. Repairs and protective coatings of hydraulic works (pipelines, dams, tunnels etc.), marine structures and artefacts in critical situations: aggressive chemical-physical agents, leaching water, marine atmosphere, etc. Specific for shotcrete interventions in galleries, tunnels, rock walls, irrigation and hydraulic channels, piles and micropiles, diaphragms, etc. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., conveniently saturated with water until they reach the condition "saturated with dry surface". An adequate roughening of the surfaces by scarifying, sandblasting etc. is always necessary in order to obtain the maximum adhesion values to the substrate. The optimal values are obtained with high pressure hydro-scarification. Bare the irons undergoing disruptive oxidation or deeply oxidized, removing the rust of the exposed irons (by sandblasting or abrasive brushes). The use of pumping/spraying machines specifically designed to be used with fibre-reinforced structural mortars is recommended. For the spraying of structural mortars such as Repar Tix HG SB, an effective and sometimes prolonged mixing of the product, which must take place upstream of the pumping circuit, is always recommended. For this reason, the use of “plaster sprayers” with volumetric water dosage is not recommended. Pour about 2/3 of the mixing water into the mixer, add Repar Tix HG SB and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 16% of the weight of the bag. Addition of Bond HG to the mixing water, (approx. 0.5 litres per 25kg bag of product) in the single component version, allows further improvement in terms of adhesion, hold, impermeability, workability, modelling and deformation capacity. In the case of use of the product in the two-component version, pour component B (liquid) into the mixer, gradually adding component A (powder) and mixing until the lumps are completely eliminated. For high coating thicknesses, static requirements, monolithic requirements, etc., performed with Repar Tix HG SB, it is advisable to use suitable metal reinforcements (electro-welded mesh, cages, etc.), anchored to the support with Syntech Profix, GROUT MICROJ, Repar Tix G2. Approximately 18,5 kg/m² of Repar Tix HG SB for every centimetre of thickness to be implemented (approximately 1850 kg per cubic metre). Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Anchorsana Fix Premixed based on hydraulic lime, special sulfur aluminate binders, water retainers, shrinkage compensators and reducers of the water/binder ratio, used for fixing and anchoring, in masonry, connectors, inserts, bars, brackets, grouting of the joints, tacking of lesions. It is a product with accelerated setting and hardening, with setting start at 30 ', end setting at 60' and development of mechanical strength already after 90 'of curing. Particularly recommended in the restoration of period and monumental buildings. The particularly fine constituent materials allow adequate anchoring even in the presence of a small space between hole and connectors. By mixing Anchorsana Fix with different water contents, the product passes from thixotropic consistencies (23% water) to fluid gel consistencies (30% water), allowing any type of anchoring, from overhead to inclinations towards the bass. The product does not contain resins and solvents and can also be used indoors, subject to the usual precautions necessary when handling materials based on alkaline and irritating powders such as lime (use suitable personal protective equipment, such as gloves and protective goggles). Fixing and anchoring, in masonry bodies, of rigid connectors, jib connectors, inserts, bars with improved adherence, anchors. It develops great adhesion on materials of different nature: metal, fiberglass, basalt. Blow with compressed air and forced suction of the housing holes. The application surfaces must be clean, free of dirt, moving, crumbly and incoherent parts, dust, etc., suitably saturated with water until reaching the condition of "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer; gradually add Anchorsana Fix and the water still required, continuing to mix, until a homogeneous, lump-free mixture of the desired consistency is obtained. Apply with a trowel or by casting. The mixing water indicatively required is equal to 23% by weight for thixotropic doughs, and to 30% by weight for doughs with a plastic-fluid consistency. Approximately 1.6 kg of Anchorsana Fix for each cubic decimeter of volume to be filled. Bag 25 kg - Pallet: 50 x (Bag 25 kg)

Osmocem N gray Cement compound for the preparation, with the sole addition of water, of a waterproofing osmotic coating that can create horizontal and vertical barriers, also suitable in conditions of negative hydrostatic thrust vis-à-vis water permeation in the buildings. Typical uses include waterproofing underground rooms, elevator compartments, garages, basements, tanks, etc. The action of the active components and of the adhesion promoters of Osmocem N, saturated by the reaction the support capillaries, forming a complex system of gel and stable crystals, which results in the best sealing, effective even in conditions of negative hydrostatic thrust, without hindering the breathability of the walls. Osmocem N is compatible for food substances: is certified as suitable for the containment of foodstuffs and drinking water (Certificate no. 02/2010 Laboratorio Analysis Service di Settimo di Pescantina - VR). Osmocem N waterproof test: • Resistance to positive hydraulic thrust, UNI EN 12390/8: water penetration depth with 5 bar pressure = 1-2 mm (*) • Impermeability to negative hydraulic thrust, UNI EN 12390/8 modified (concrete support a / c ratio 0.7): no passage of water with a pressure of 1.5 bar (*) concrete with penetration depth <= 20 mm are considered waterproof. Waterproofing rigid structures and masonry walls underground, buried or in any case subject to water permeation: lift wells, basements, tanks, pipes, tunnels, garages, bridges, reservoirs, areas containing food, etc. in conditions of positive and negative hydrostatic thrust provided they are sufficiently porous and absorbent and free from any waterproofing and / or water-repellent surface treatment, whether chemical (siloxanes, epoxies, polyurethanes, etc.) or natural (wax-up). Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc., water repellent treatments in general, etc. conveniently saturated with water until they reach the condition "saturated with dry surface". Pour about 2/3 of the mixing water into the mixer, add Osmocem N and the remaining water; continue to mix until a homogeneous lump-free mixture is obtained. The mixing water should be about 19-20% (for interventions in the form of a spatula) or 21-22% (for interventions using a brush with long bristles). After mixing is completed wait a few minutes before applying. If applied by brush, roll out two or more crossed coats. Although it is not a specific product for finishing thick coats, it can still be used for these purposes. In these cases, it is appropriate to use a fibreglass mesh Armaglass 160. Approximately 1.7 kg/m² of Osmocem N for each millimetre of thickness to be made. Packaging: 25 kg bag UM: €/kg

I curcuminoidi sono in grado di prevenire la formazione di radicali liberi e già di neutralizzarli quelli esistenti. È un potente antinfiammatorio. Può essere utilizzato in caso di diabete neuropatie. Migliora la funzione articolare e riduce il dolore. Può diminuire e normalizzare i livelli di trigliceridi e di insulina nel sangue. Agisce sul colesterolo cattivo. Aiuta a mantenere le arterie sane. Confezione:30 compresse a lento rilascio

Maxant® PRO is a highly effective silicone antifoam emulsion. It offers excellent foam control and high stability in various foaming systems. Permanent foam cut off Stable effects during storage period Rapid foam knock-down Foam inhibition in extreme temperatures (up to 95 °C) Long term foam inhibition Compatibility with wetting agents Long durability in acidic and alkaline conditions Outstanding durability at low add on levels Maxant® PRO is mainly designed for preventing foam in process applications. For process applications, we recommend prediluting Maxant® PRO silicone antifoam with cold water in a ratio of 1:1 to 1:10. Appearance Visual:Milky white liquid Solid Content (%) HE73 / 01, Mettler Toledo, 160°C.:20-25% pH at 25°C pH 7110, Inolab:7-8 Ionic character:Nonionic Viscosity at 25°C LVDV-E 230, Brookfield:1000-1500 CP

Installations de chauffage S’utilise dilué à 2% dans le circuit ! Protège contre la corrosion tous types d’installations de chauffage. Réf:INC463 Conditionnement:Bidon de 1 L – Carton de 12 Ex:INHIBITEUR DE CORROSION

Nettoyant industriel surpuissant spécial sols lisses Non moussant – Formule anti-dérapante – Biodégradable Enlève les traces noires de roues de chariots, de gomme de pneumatiques, de chaussures, de graisses, de carbone… Sols en ciment, sols peints, carrelages, linoleum, grès… Entrepots, parkings… Ex:SUPERDAEX Conditionnement:Bidon de 5L – Carton de 2, Bidon de 20 Litres

Gel microbilles sans solvant, salissures fortes Excellentes performances nettoyantes – Parfum orange frais et tonique – Testé sous contrôle dermatologique Pour graisses, lubrifiants, cambouis, hydrocarbures, goudron, poussières freins, peintures fraîches. La texture adhérente du savon gel microbilles AEXALT Orange n’agresse pas la peau et se rince facilement. Le gel laisse un touché doux sur l’épiderme et une discrète odeur citronnée. Idéal dans les ateliers, sur les chantiers, les services de maintenance, en imprimerie, etc. NB : les gels microbilles AEXALT sont formulés avec des abrasifs d’origine naturelle. Réf:SA671 Conditionnement:Pot de 5 L, Seau de 15 L, Seau de 25L Parfum:Orange Ex:AEXALT ORANGE

Débloque et lubrifie les pièces grippées avec une grande efficacité. Compatible avec tous les métaux. Produit particulièrement mouillant. Il pénètre rapidement entre les surfaces oxydées, disperse la rouille, les salissures et les dépôts divers pour libérer les mécanismes corrodés ou coincés. Laisse un film gras très mince formant une barrière protectrice contre l’eau et l’oxygène. Diminue le frottement entre les pièces mécaniques et les plastiques. Une action prolongée permet d’éliminer les traces de rouille, cambouis, goudron, colle, adhésif, résine ou calamine même brûlée. Protège les métaux sans agressivité vis-à-vis des peintures et caoutchoucs. Chasse l’humidité et assure des contacts électriques parfaits. Appliqué au montage, il assure une protection de longue durée en s’opposant à l’accrochage de la rouille sur le métal. Compatible avec tous les métaux et la plupart des plastiques, peintures, etc. Réf:AO773 Conditionnement:Bidon de 5 L – Carton de 4, Fût de 220 L

Insecticide volants à effet de choc immédiat Elimine mouches, guêpes, bourdons, moustiques… Recommandé pour la lutte contre les insectes des denrées alimentaires. Inoffensif pour l’homme et les animaux à sang chaud – ∙ Parfumé à la citronnelle Réf:IV076 Conditionnement:Aérosol de 650 ml – Carton de 12 Parfum:Citronnelle